Co2 Recovery Plant

• Automatic Grade: Automatic
• Capacity: 100 Kg/hr
• Brand: Sam
• Output: 1850m3/h
• Liquid CO2 Storage Capacity: 15 Metric Ton
• Cooling Water: 7.5 m3/hr

Our precision engineered a range of CO₂ Recovery Plant is available in various capacities and models as per the client's specific requirements. These are designed as per client specifications and can store liquids and gases under high pressures. The CO₂ recovery plant we design and manufacture for clients is a fully automated plant, which is meant to recover the revert CO₂ gas and has the capacity of handling a large quantity of carbon dioxide every hour. It is manufacturing from best quality stainless steel in order to avoid any sort of problem-related to corrosion in future. Some of the features of the range we offer. These CO₂ Recovery plants are fully automatic and use a low concentration, efficiently and safely produce the highest and purest quality of liquid carbon dioxide.

Each Plant is assembled and tested to the fullest extent possible and finishes painted in our factory (Assembly has done) and at Clients Site (Complete trial run). Plant Construction is done very carefully by selecting proper and suitable raw material to give a good balanced between plant life, strength, and careful operation and the maximum value of money. These plants are compact to design and layout to make the best use of space at your factory and to give you pure carbon dioxide.

Product detail:

Utility Requirement of CO2 Recovery Plant for different capacities
Plant Capacity	Power		Makeup water		Liquid CO2 Storage Capacity	Cooling Water
In Kg/Hr.	Ft.	Mtr.	Ft.	Mtr.	In Metric Ton	M3/HR	Gal/Min
100	33.5	44.9	0.4	1.76	15	7.5	30.8
250	83.7	112.3	1.0	4.4	25	17.5	77.0
500	167.5	224.6	2.0	8.8	50	30.0	132.1
750	251.2	336.9	5.9	13.2	100	45.0	198.2
1000	334.9	449.2	7.9	17.6	110	60.0	264.2
1500	502.4	673.8	6.0	26.5	150	90.0	396.3
2000	669.9	898.4	8.0	35.3	200	120.0	538.4
* Larger Capacities are available on request as per customer.

CO₂ Recovery Plant Process Description: First we are getting raw gas from Fermenters and then we will take this gas in to our system then we take gas in foam trap where we remove the foams come along the gas and then with the help of booster blower we will push the gas in to the chain /series of scrubbing systems consists of pre-water scrubber, Kmno4 scrubber with dosing facilities and then after water scrubber. In this chain of scrubber we wash the CO₂ gas by means of water and then raw gas gets buffer in a buffer vessel and then it goes to two-stage CO₂ compressor where it compresses up to the desired pressure and then raw gas goes to the Dual tower activated carbon filter where the odor of raw gas removed and then raw gas enters into the high-pressure precooler and then enters into the Dual Tower CO₂ dryer and then into the liquefaction system and Nox Removal Tower and then the liquid goes directly to the Storage tank where the gas stores for a particular period of time.